UT-TGD01P Portable Single-Gas Detector

UT-TGD01P Portable Single-Gas Detector



U-Tai UT-TGD01P portable single-gas detector product image


UT-TGD01P Portable Single-Gas Detector

Detector type: Portable single-gas detector with voice prompts (one target gas per unit)

Sensor principle: Catalytic combustion (combustible gas) / electrochemical (toxic gases and oxygen)

Display: Dot-matrix LCD with Chinese / English interface

Alarm: Voice broadcast + simulated siren + LED light + vibration motor

Conventional ranges: EX 0–100% LEL (low 20 / high 50% LEL); H2S 0–100 ppm (10 / 35); CO 0–1000 ppm (50 / 150); O2 0–30% vol (low 19.5 / high 23.5% vol); NH3 0–100 ppm (20 / 50); H2 0–1000 ppm; Cl2 0–20 ppm — more gases available per the sensor selection table

Display error: ≤ ±5% FS

Response time: < 30 s

Working temperature: -20 °C to +50 °C; humidity < 95% RH

Battery: DC 3.7 V rechargeable lithium, 1800 mAh; charging 4–6 h; over 10 h continuous monitoring at full charge

Sensor life: 2 years

Protection: IP65 — dustproof, waterproof and explosion-proof housing

Explosion-proof: Certified; intrinsic-safety design per GB3836.1-2010 and GB3836.4-2010; combustible-gas design basis GB15322.3-2003 (per product manual)

Size: 114 × 60 × 26 mm; weight: 120 g

Functions: Alarm record storage, password-protected settings menu, zero and calibration functions, USB charging

Download UT-TGD01P user manual (PDF)


UT-TGD01P FAQ

Is the UT-TGD01P a single-gas or multi-gas detector?

Single-gas: each unit is fitted for one target gas — EX, H2S, CO, O2, NH3, H2, Cl2 and more per the sensor selection table. Choose the sensor for the hazard being monitored.

Can a portable detector replace a fixed gas detection system?

No. Portable detectors protect people who move: personal protection, patrol checks and confined-space pre-entry testing. Fixed systems protect places continuously. Many Malaysian sites use both — see our fixed vs portable guide.

How long does the battery last?

The 1800 mAh lithium battery provides over 10 hours of continuous monitoring at full charge (4–6 h USB charging). Recharge outside hazardous areas.

Is the UT-TGD01P explosion-proof?

The detector is explosion-proof certified and its intrinsic-safety design follows GB3836.1-2010 / GB3836.4-2010. Do not open, modify or charge it in an explosive atmosphere.

Related gas detection questions

Browse all gas detection questions